Modellbau Magazin Scale Rotors
You are here: Home > Gallery > Utility Helicopters > Eurocopter EC-135 P1

Eurocopter EC-135 P1

by Felix Troschier (1:72 Revell)

Eurocopter EC-135 P1

This is my Eurocopter EC-135 from Revell built in 2002. The model is as it comes out of the box, I didn't correct the major mistakes like the too high "rudder", the wrong-direction-turning-main rotor and so on. As this kit is more or less a downscale of the 1/32 kit, the overall fit is not the best. But with a little patience, it is possible to get a good result. Unfortunately there are minor inaccuracies witht the decals. The lettering on the door is to big and should not reach over the gap of the doors and there is one star in the european flag which was not printed correctly. (at least the latter one was recognized by revell and fixed) Today I would say that the washing is far too strong for an EMS helo as they usually are quite clean. This bird represents the rescue helo "Christoph 16" based at SaarbrŁcken Winterberg Hospital. The decal sheet has also the option for a bird from Austria's ÷AMTC.

Eurocopter EC-135 P1

Eurocopter EC-135 P1

Eurocopter EC-135 P1

Eurocopter EC-135 P1

Felix Troschier

Published on 08. December 2009

To reply or post here you need to be registered and logged in on scalemates.com.

You are here: Home > Gallery > Utility Helicopters > Eurocopter EC-135 P1

© 2008-2012 Scale Rotors | About us | Submissions | Privacy | Advertise